2018 Ryan Lawnaire® IV with EST (Honda®) 554913A

$3,241.00


Lawnaire® V Model Shown

Lawnaire® V Model Shown

Availability
Brochure
Year
2018
Manufacturer
Ryan
Model
Lawnaire® IV with EST (Honda®) 554913A

Overview

Description

Whether you’re a rental house, small lawn care contractor or homeowner, the Lawnaire IV with Easy Steer Technology has an application to suit your needs.



Legendary Lawnaire Performance and Durability with Easy Steer Technology. The tine assembly allows the operator to steer the unit without taking the tines out of the ground. This is accomplished by designing each tine assembly to independently rotate yet be able to drive. This translates into higher productivity and less physical stress on the operator because it is easier to use. Thirty tines spread over a 19-inch swath offer a productive aeration rate of nearly 29,000 square feet per hour.

Power
  • Engine Model: 4-cycle Honda GX120; recoil start; on/off switch
  • Displacement: 7.2 cu in. (118 cc)
  • Fuel Capacity: 0.53 gal. (2 L)
  • Oil Capacity: 0.59 qt (0.56 L)
Unit
  • Clutch: Belt tightener
  • Drive: Primary: 4L section V-belt
  • Drive: Tine & Drum: Single #40 nickel-plated chain
  • Tines: 0.75 in. (19 mm) diameter coring type formed from 0.08 in. (2 mm) hollow, austemper-hardened alloy steel; 30 tines per aerator
  • Lubrication: Grease zerks on the wheels & idler pivot / oil chain
  • Coring Depth: Up to 2.75 in. (70 mm)
  • Core Diameter: 0.75 in. (19 mm)
  • Aerating Width: 19 in. (483 mm)
  • Aeration Pattern: 3.75 in. x 7 in. (95 mm x 178 mm)
  • Holes per Sq Ft: Up to 9 sq ft
  • Productivity: Aerates up to 29,000 sq ft/hr (2,694 m2/hr) at 3.5 mph (4.83 kph)
  • Tires: (2) 8x2.25 semi-pneumatic w/ball bearings
Dimensions
  • Weight: Wet w/o Weights: 214 lb (97 kg)
  • Weight: Wet w/ Weights: 255 lb (116 kg)
  • Weight: Wet w/ Weights and Water in Drum: 298 lb (135 kg)
  • Width: 28 in. (711 mm)
  • Length: 53.5 in. (1,359 mm)
  • Height: 48.8 in. (1,240 mm); 30 in. (762 mm) w/handle folded
NOTES:
Specifications subject to change without notice.

Specs

Machine

Coring Width
19 in. (483 mm)
Coring Depth
Up to 2.75 in. (70 mm)
Hole Pattern
Aerating: 3.75 in. x 7 in. (95 mm x 178 mm)
Height
48.5 in. (1,232 mm)
Weight
214 lb. (97 kg)
Width
28 in. (711 mm)
Length
53.5 in. (1,359 mm)

Engine

Engine Manufacturer
Honda
Engine Type
GX120
Engine Size
7.2 cu in. (118 cc)

Promotions


Related Products